Heavy chain link fence used with razor barbed wire for security

Heavy type chain-link fences with razor barbed wire supply high strength and security

Chain link fencing is popular as security fence nowadays. It can be found in many fields, such as prison, highway, zoo, parks, personal houses and others. The fence can be used as galvanized chain link fabric, PVC coated iron chain wire fence and stainless steel chain link fence. Heavy type chain-link fences with barbed wire or razor wire fence together can supply high strength used for prison security.

Heavy galvanized chain link fence used with barbed wire for high strength and security fence

1. Fabric: Heavy Galvanized Chain Link Fabric made from Galvanized steel wire, 3.76mm dia, mesh size 50x50mm, fabric height 2.40M barbed selvage, supplied in rolls of 15 M each.
2. Tension Wire: Heavy Galvanized 3.76mm dia, sufficient for 3 rows.
3. Barbed Wire: Galvanized barbed wire, 2 Ply, 4 Points. Galvanized strand wire 2.50mm dia, Galvanized barb wire 2.0mm dia, spacing between barbs 101mm, supplied in reels of 200 M, sufficient for 6 rows.
4. Line Posts: 60.3mm od × 3.91mm wall thickness × 3.20MR long Galvanized steel post with Galvanized 'V' shaped extension arm on top to take 6 rows of barbed wire, spacing at 3.0 M intervals.
5. Pull Post: 73.0mm od × 5.16mm wall thickness × 3.20M long Galvanized post with 42.2mm od × 3.56mm wall thickness × 6.0 M long Galvanized steel brace rail pipe, Galvanized 'V' shaped extension arm to take 6 rows of barbed wire. Pull Post supplied with standard Galvanized straining fittings like truss rod, turn buckle, tension bar, bands etc., spacing at 152 M intervals.
6. Corner Post: Same as item no. 5 above, but with corner extension arm.
7. End Post: Same as item no. 5 above, but with only half the fittings.
8. Bottom Rail: 42.2mm od × 3.56mm wall thickness × 6.0 M long Galvanized steel Bottom Rail Pipe with galvanized steel clamps to connect the pipes together.

Heavy chain link fencing application With Razor Barbed Wire

Heavy duty arms twine type– Y install on 3" dia fence post, for razor barbed wire. Hole opening at the sides to be 1 1/4 ".
Razor barbed wire. galvanized fencing type 600 mm o.d no. of loops 86. standard length per coil 14 meters, # BTO - 28
Galvanized tie wire, 5/32" wire thickness, standard length per coil 14 meters.
Galvanized chain link fence 10 ft height, 5/32" gauge wire thickness, 2" mesh, 50ft length of each roll ASTM A -392 class 2. 60 micron coating.

Diamond wire mesh features and application - chain link fence

Diamond wire mesh - the fence, you can adjust its length

diamond wire mesh is also known as rhombic wire mesh. Our diamond fence enjoys quality materials and uniform openings, smooth surface and nice appearance, thick wire gauge and good corrosion resistance. It is widely used in breeding of animals, protection of machinery, fencing of express highway, sports field and roads or making handicrafts and wire mesh conveyor belts. Diamond mesh fence can also be made into containers, then filled with stones, used as materials for protection and support of banks, mountains slopes, bridges, water reservoir and other constructions.

Diamond wire mesh in general is made of the materials of galvanized iron wire, vinyl- coated iron wire, stainless steel wire and so on. The vinyl coated color is light green, gray, dark brown, black and white. Diamond wire mesh top types include knuckle type, horizontal type and Twist type.

When order a diamond wire fence, please give the data about the wire mesh length, height, mesh opening, wire diameter and materials, end treatment and package types. If the chain link fencing length is not the just right, you can adjust the length by inserting or removing a single line.

Diamond wire mesh fence specifications:

Diameter of wire mesh: 3.76 mm. + / -0.7 mm
Aperture of the table: 75 mm.
Zinc minimum > 90 g/m²
Roll size: Width: 2.5 m × 25 m, Length
Finished: galvanized, PVC coated

Galvanized non-oxidize diamond fence used for yard and zoo.
Width: 2 inches (5.08cm).
Thickness: 2.5mm (0.25cm).
Height 1: 8 Feet × 2 (243.84cm × 2).
Height 2: 9 Feet × 2 (274.32cm × 2).

Diamond wire fence features:

1. It is easy to cut pieces. Since the combination of the column line will be connected with a spiral process, the following can be easily cut.
2. Support for a variety of shapes. Chain fencing can be accommodated all site conditions.
3. Can be a variety of making. Plain weaving, knuckle processing, horizontal processing, twist processing and so on. And the width can be up to 10m.
4. A combination of mesh and wire diameters are various. Wire diameter can range from 1.6mm to 5.0mm, mesh opening can be from 25mm to 100mm.

Galvanized after weaving chain link fence photo and specification

GAW Chain link fencing provides exceptional protection in industrial and residential.

When choosing your galvanized chain link fence system, insist on Galvanized After Weaving (GAW) fence fabric. GAW is the only zinc coated chain link fabric that is coated after weaving, ensuring that all surfaces of the base metal are protected. GAW also provides the best protection against rust and corrosion in even the most severe coastal industrial environments. Combined with zinc coated framework, galvanized chain link fence systems provide exceptional security and protection in industrial, commercial, institutional, recreational, residential applications. With any pre-coated wire, the weaving process leaves the twist and knuckle tips bare from trimming. Cut ends may be dipped in other materials, but they are no substitute for the thorough zinc coating protection of the GAW process.

Finish: Committed to the products, GAW producers assure you of chain link fabric with a complete coating. A continuous vertical dip and retrieval process removes excess zinc and keeps joints from welding.

Galvanized chain link fence used in construction specifications:

Diameter Wire: 3mm, 4 mm, 5mm
Aperture: 3 × 3, 4 × 4, 5 × 5
High :2.0 meter
Packing: in roll 25 meter.

GAW chain link fencing benefits

1. Zinc-based process offers the most active cathodic protection.
2. Heavier and more thorough coating with no flaking and bare trim ends.
3. Additional protective coating to prevent while rust.
4. All components of GAW fence systems are zinc coated.
5. Consistently meets ASTM specifications.

GAW chain link fencing is resistant to defacement and offers total visibility. But when combined with landscaping, chain link fence provides an attractive visual barrier while maintaining security.

Black chain link fence, 3.55/4.75 mm Wire, 2m x 45m Rolls

Black chain link fence creates a beautiful yard and pool fencing

Black Chain Link Fence is one popular PVC chain link product. With the bright color, black chain link fabric is much suitable for the yards, parks, zoos, pool fencing, industrial zones compared to galvanized chain fencing and stainless steel chain-link fence. In addition, it costs low than other type materials.

Specifications

1. Wire Diameter: 3.55/4.75 mm, 2.50/3.55 mm, 2.24/3.15 mm, 1.70/2.50 mm. As the iron wire surface is with the vinyl coating.
2. Mesh Opening: 30mm - 60mm.
3. Fence Height: Common heights include 1m, 1.2m, 1.5m, 1.8m, 2m.
4. Package: The standard black chain link fence rolls length is 30m or 45m, special length can be available.

As we all know, more and more people in modern times attach great importance to individual privacy, chain link fence slats may be needed. Vinyl coated chain link fencing mainly act as a solid barrier which can effectively prevent other people from seeing through your fence. What's more, there are many different colors for you to choose, such as gray, green and so on. You can select according to your personal preference to match your fences.

Black chain link fence as pool fencing creates a beautiful home
Black chain link fence

Chain link fence gate, types and installation

Chain link fence gate decorates yards and gardens and protects your property

With more and more attention on decorative style and creativity, chain link fence gate is widely used to decorate yards, gardens and to protect their property. The chain link fencing materials are durable and cost low and no maintenance. Chain link gate and gate fittings - specifically the male/female hinges and latch hardware are available in our factory.

Chain Link Fence Gates have five types: Walk Gate, Single Gate, Double Swing Gate, Cantilever Gate and Roll Gate.

Walk Gates is easy to install and widely used. And it can be installed with roll wheel to go in and out conveniently. Walk Gates can be made to any height and color in both chain link and ornamental. Scrolls are optional for chain mesh gates.

Single Gates can be manufactured for larger openings. Just make sure there is enough room for the gate to open. Single swing gates can be automated.

Double Swing Gates have two leafs and a drop rod to hold them in place while the gate is shut. Double swing gates can be automated.

Cantilever Gates slide open on rollers attached to counterbalance posts. These gates can also be automated and are great for larger openings.

Roll Gates roll on the ground and on a track attached to the fence. These gates cannot be automated and require enough fence space to roll back into.

New order
I am trying to find a source for a gate to fit a 34 foot opening. I would like to use two 17 foot gate to cover this area. One swinging at each side and meet in center . The height needs to be 6 foot.

Black chain link fence and gates technique specifications:

• 1. 2mt high black powder coated chain link fencing and gates as follows:
  Gate and end posts 40NB galvanized steel powder coated black
  Posts 32NB galvanized steel powder coated black
  2. 4mt centers
  Top rail 25NB galvanized steel powder coated black
  Attached to posts with black powder coated down fittings Chain wire galvanized steel black PVC coated, 60×60 diamond
  Bottom cable black PVC coated* 3 sets double gates 25NB frame powder coated black
  3. 2mt opening size, black chain wire infill.
• Gates is swing type, hinged to swing 180 degrees from closed to open,
  complete with frames, latches, stops, keepers, hinges, fabric, braces,
  and PVC coating wire mesh(50×50), diameter 4mm.
• 42 × 42", 42 × 48", 48 × 48", 42 × 60", 42 × 72" single walk fence gate 1 3/8" tubing hot dipped galvanized
  12' × 42", 12' × 48", 12' × 60", 12' × 72" double drive fence gate 1 3/8" tubing hot dipped galvanized
  6' × 6', 6' × 12' kennel panel 1 3/8" tubing hot dipped galvanized
  Cattle/wrangler panels with bow gate and cattle wrangler panels with hardware attached: 18 gauge or 1.2mm thick. Galvanized then powder painted brown.
  Tube gates: 18 gauge or 1.2mm thick. Galvanized then powder painted brown.

How To Make Chain Fence Gates

If you do not want to buy a chain link fence gate and then do it by yourself, install it where you want to install. This is not difficulty things, so you can save a lot of spending.
used in the production process: tape measure, gate post hinges, gate fork latch, bolts, sockets, wrench, chain links, gate frame, brackets, solder, pliers.

Here are chain link gate installation steps and tips.

• First: under the instructions, make a gate framework and the first part attached on the sliding belt. Then sliding parts are assembled door frame with your hands.
• Second: sliding a rod into the fence and through a coil.
• Third: attach the tension band and slide the second lever into the mesh. Make sure you slide it close enough to the opposite side rail to hold the mesh taut once you attach it to the tension bands.
• Fourth: unhook the strand of mesh that's near the outside second tension bar and pull it out, removing the excess mesh with pliers.
• Fifth: pull the mesh along with tension band tightly while slipping the tension bar into the tension bands on the frame of the gate with pliers, if the net is not tight enough the lever to into go to the next set of loops. Unravel the excess mesh and hook the bar back into the tension bands.
• Final: attach the tie line to the benchmarking of the top and bottom once the mesh is fixed in one place. A Cable line in the mesh around the hook with pliers, pulled the network cable has been slightly higher than the door frame to the network. Ensure let the tie cord around freely in the mesh around with pliers.
• Tips: his metal hardware must be ready to complete. In order to switch the gates must be to the height of the ground.

Our new project of gates and fences

• Double Swing Gate
  Material Steel
  Surfacing Galvanization with plastic-coating
  Dimensions Height: 200cm, Width: 400cm
  Frame: 5cm × 5cm
  Vertical bars of 2.5cm × 2.5cm, welded at a distance of 10cm
  Square posts with cap: 20cm × 20cm × 250cm
  Hot dip galvanized coating ISO 1461
• Single Swing Gate
  Material Steel
  Surfacing Galvanization with plastic-coating
  Dimensions Height: 200cm, Width: 100cm
  Frame: 4cm × 4cm
  Square mesh of 5cm × 5cm, welded into the frame
  Square posts with cap: 5cm × 5cm × 250cm
  Hot dip galvanized coating ISO 1461
• Fences
  Material Steel
  Surfacing Galvanization with plastic-coating
  Dimensions Fence height: 200cm
  Panel width: 250cm
  Height of posts: 250cm
  Mesh: 10cm × 5cm 
  Hot dip galvanized coating ISO 1461

Stainless Steel Chain Link Fence Features And Sizes

Stainless Steel Chain Link Fence for garden fencing

Chain link fences common types not only have galvanized chain fencing, PVC chain link fabric, but also include stainless steel chain wire fences. Stainless steel chain link fence is more durable compared with galvanized chain link, made of 201, 302, 304, 304L, 316 stainless steel wire.

Weaving and Features:

Woven diamond pattern provides strong, durable and flexible construction. The closely spaced diamond mesh construction gives your fence linear strength and springy texture to protect horses from injury and prevent predators from entering paddocks and pastures. With stainless steel materials, it has alkali resistance, high temperature resistance and weather resistance, does not break, does not sag or roll up at the bottom.

Stainless Steel Chain Link Fencing Specifications:

Wire diameter: 1.2-5mm;
Mesh opening: 1", 1.5", 2", 2.25", 2.4", 2.5", 4".
Fencing Height: 0.6, 0.8, 1.2, 1.4, 1.6, 1.8, 2.5m.
Packaged in rolls: 50m/roll, or 100m/roll.

Stainless steel chain link mesh is used as fencing for high-grade playground and gardens, super highway, railway, airport, tennis sport, residence, etc. We also supply other materials chain link fence, such as brass chain-wire fence for decoration, chain link curtain for housing.

Aluminum Chain Link Fence, Specification, Features And Use

Aluminum chain link fence used in commercial as wire fencing

Aluminum chain link fence is produced by cold-drawing good commercial grade steel rod into wire of the appropriate diameter. The steel rod from which the wire is drawn shall be produced by the open hearth, electric furnace or basic oxygen process. The coating is produced by passing the cleaned wire through a molten bath of aluminum metal.

Aluminum Chain Link Fencing Features: Corrosion resistance, Lightness and nice appearance, Long life time, High tensile and easy installation, Adapt to the harsh environment.

The base metal of the chain link mesh is composed of commercial quality medium-carbon aluminum coated wire. The wire is coated with aluminum to produce a smooth and uniform coating. The weight of aluminum coating, wire sizes with allowable variances, and wire breaking strength, conform to ASTM A 817 for the wire size specified. The wire is aluminum coated before weaving.

Standards:
ASTM A 491 Aluminum-Coated Steel Chain Link Fence.
ASTM F567 Installation of Chain Mesh Fencing.
ASTM A 817 Metallic-Coated Wire for use in Chain-Link Fence Federal specification. RR-F- 191 K/1 D Type II, Fencing, Wire and Post Metal (Chain-Link Fence Fabric) American Association of State Highway Transportation Officials M-181 Chain Link Mesh, Type II.

Specifications:
Aluminized fabric is available in mesh sizes from 3/8 inch to 2 inches, and in heights from 36 inches to 240 inches. Unless otherwise specified, chain link fabric woven with a 2 inch (50 mm) mesh and 60 inches (1,520 mm) or less in height is knuckled at both selvages; 
Chain link fence end types: K- Knuckle, B- Barb.

(Mesh × Gauge × Height)	Ends
2" × 9 × 36"	K×K
2" × 9 × 42"	K×K
2" × 9 × 48"	K×K
2" × 9 × 60"	K×K
2" × 9 × 72"	K×B
2" × 9 × 84"	K×B
2" × 9 × 96"	K×B
2" × 9 × 120"	K×B
2" × 9 × 144"	K×B

Aluminum Chain Link Fence
Nominal Wire Diameter			Allowable Variance		Aluminum Coating  Weight, minimum		Breaking Strength minimum
Gage	inch	Mm	inch	mm	oz/ft2	g/m2	lbf	Newtons
6	0.192	4.88	+0.005	+0.13	0.40	122	2,170	9,650
9	0.148	3.76	+ 0.005	+0.13	0.40	122	1,290	5,740
10	0.135	3.43	+ 0.005	+0.13	0.40	122	1,290	5,740
11	0.120	3.05	+ 0.005	+0.13	0.35	107	850	3,780

Aluminum Chain Link Fencing Applications:
Aluminum coated (aluminized) steel chain link for commercial, industrial and institutional applications. Aluminized fabric is contained in various government specifications for use in prison, road, dock, airport, housing, forestry, and military use.

Aluminum chain link fencing using with barbed wire

Here is the chain link fence, barbed wire, other accessories specification needed.Standard 50 × 10 gauge (mesh × gauge) Aluminum chain link Mesh (3M high × 2600M Length) (3.1 - 3.24mm diameter).Strands of Aluminum Barded Wire (2.2mm diameter).Strands of 3.25 mm straining wire (4.0 - 5.5mm diameter).25 × 4 mm galvanized steel metal beading.65mm × 65mm × 6mm galvanized steel angle.Straight barbed wire: 2.5mm diameter.Barbed wire spring (for making wire barbs) : 2.2mm diameter.Line straining wire (straight wire): 4.0 - 5.5mm diameter.Chain link for mesh: 3.1 - 3.24mm diameter.aluminum alloy is Al Mg 2.5 or equivalent.

Strength of the materials:

materials	Straight barbed wire	Barbed wire spring	Line wire	Chain wire
Nominal diameter	2.5	2.2	4.0 to 5.5	3.1
Measured mean diameter	2.5	2.20	3.98	3.09
Sectional area	4.91	3.8	12.44	7.5
0.2% proof load	56	115	376	197
0.2% proof stress	11.4	30.3	30.2	26.3
Maximum load	106	127	440	236.5
Tensile strength	21.6	33.4	35.4	31.5
Elongation on gauge length 50	8	6	13	8

PVC coated chain link fence gives you an attractive sport fence

PVC coated chain link fence for hostile condition fences solution

PVC coated chain link fence also called vinyl coated or plastic coated chain link mesh is woven accurately with PVC wire in green or black color. Add color and style to your fence with color coordinated, vinyl coated chain wire fence. The heavy fence coated with fused and bonded vinyl is guaranteed for years of trouble-free use.

Green color PVC chain link fence used as sport fence
PVC coated chain-link fence packed with yellow plastic bag

The mesh shape can be square (when their angle is 90 degrees) and diamond (if the angle is 60 degrees). Please see the following images, the left is diamond shape and the right is square shape.

Our PVC chain link fence specifications:

Core wire: low carbon steel wire, electro galvanized
PVC coating RAL 6005  - fused and adhered
Tensile strength : 340 to 480 N/mm²
Inside wire diameter (inside/after coated) mm: 1.7/2.50, 1.8/2.6, 2.2/3.2, 2.5/3.55, 3.55/4.75
Hole size: 30mm; 40mm, 50mm.
Roll length: 10m – 30m
Width: 1 -2.5 meters
Galvanized pipes in the shape of V or pend.

Feature: In order to make chain link fence served without rusting and against corrosion. The chain wires can be PVC coated, galvanized, or zinc and PVC coated. The more zinc, the longer chain link will not rust. But the sea air, acid rain, ammonia, turning into nitric acid, it is easy to destroy the layer of zinc. To use it in such hostile environments the wire must with PVC coated. Zinc and PVC wire is actually already galvanized then the vinyl is placed and sealed around it. It has the best durability and resistant to corrosion; and it is not afraid of oil and water.

Application: Chain link fence with PVC coated is lightweight and perfectly resists aggressive environmental influences, and it has an attractive appearance. So it is the best choice for gardens, tennis courts, sports fields fencing. And it is also suitable for using in the oil field, sea around and coast of the salt sea. Green or black chain link fencing is also suitable for creating indoor dog pens

However, there are small shortcomings: no chain link fence will prevent peeping from outside prying eyes, unless used with chain link fence slats.

PVC coated chain link fence used for grass fencing
Chain link fence provides security for the factory

Galvanized chain link fence is used for garden fencing solution

Galvanized Chain Link Fence

Galvanized hot-dipped zinc coating chain link fence is the most popular and inexpensive method for protecting chain-link fence systems. It is made from galvanized wire. Preferred for decades to define property lines and protect property, galvanized chain-link offers a versatile fencing solution that will provide years of maintenance-free protection. Galvanized chain link fencing system all the steel components are hot-dipped zinc coated and can be used for 12 years.

Made from galvanized low carbon steel wire, galvanized chain link fence has the features of resistance to moisture, corrosion resistance, excellent resistance to sudden temperature changes and high durability.

Hot dip galvanized chain link fence specifications

Wire diameter: 2.70 mm-4.0mm.
Wire mesh: 30mm×30mm, 50mm×50mm, 100mm×100mm.
Width: 1m, 1.5m, 2.0m, 2.5m, 5m.
Package: 20m/roll, 25m/roll, 30m/roll, 50m/roll, 100m/roll, or 35kg/roll, 50kg/roll.

Galvanized chain-link fence used for sport fence

Application

Galvanized chain link fence is widely used in construction, industrial and agricultural for a variety of purposes:
creation of fences and barriers on the yard or garden;
separation of bulk materials in construction;
creation of exterior and interior trim before plastering.
used for poultry fencing, Galv chain link fence is a kind of chew proofing fence, and it suitable for big dog cage. If you use polyvinyl fence, dog may chews the polyvinyl.

Galvanized chain link fence packed with wooden stick
Galvanized chain link fence roll packed in plastic bag

Hot Dipped Galvanized chain link fence panels for temporary fencing.
Specifications: chain link fence opening 5cm, gauge 11 BWG, panel size 6' × 10', round pipe of 32mm dia gauge 9 BWG, one more pipe welded along width of panel (6') in middle of length of pipe frame (i.e. 5') round pipe 25mm gauge 9 BWG. vertical pipe at both end of frame should be 1.5"-2" out on both side.